M-LSM Series
Motorized micromanipulators
Series Specifications
Download Datasheet| Microstep Size (Default Resolution) | 0.047625 µm |
| Recommended Controller | MCC (48 V) Recommended |
| AutoDetect |  |
| Travel Range | 25.4 mm (1") |
| Accuracy (unidirectional) | 15 µm (0.000591") |
| Repeatability | < 3 µm (< 0.000118") |
| Backlash | < 12 µm (< 0.000472") |
| Maximum Speed | 26 mm/s (1.024"/s) |
| Minimum Speed | 0.000029 mm/s (0.000001"/s) |
| Speed Resolution | 0.000029 mm/s (0.000001"/s) |
| Encoder Type |  |
| Peak Thrust | 55 N (12.3 lb) |
| Communication Interface | RS-232, USB 2.0 |
| Communication Protocol | Zaber ASCII (Default), Zaber Binary |
| Flatness of Travel | < 8 µm (< 0.000315") |
| Straightness of Travel | < 12 µm (< 0.000472") |
| Pitch | 0.02° (0.349 mrad) |
| Roll | 0.02° (0.349 mrad) |
| Yaw | 0.03° (0.523 mrad) |
| Probe Diameter Range | 2-13 mm (0.079") |
| Probe Angle Range | 360° (6.283 rad) |
| Linear Motion Per Motor Rev | 0.6096 mm (0.024") |
| Motor Steps Per Rev | 200 |
| Motor Type | Stepper (2 phase) |
| Motor Rated Current | 600 mA/phase |
| Motor Winding Resistance | 6.5 ohms/phase |
| Motor Winding Inductance | 3.5 mH/phase |
| Motor Rated Power | 6.9 watts |
| Motor Connection | D-sub 15 |
| Default Resolution | 1/64 of a step |
| Guide Type | Recirculating ball bearing |
| Mechanical Drive System | Precision lead screw |
| Limit or Home Sensing | Magnetic hall sensor |
| Axes of Motion | 3 |
| Stage Parallelism | < 25 µm (< 0.000984") |
| Joystick Control | Velocity Mode |
| Operating Temperature Range | 0-50 °C |
| CE Compliant | |
| Vacuum Compatible | |
| Weight | 1.032 kg (2.275 lb) |
Specification Charts & Notes
Thrust or torque is a function of speed. The values given above are maximums. These values cannot both be achieved simultaneously (i.e. at maximum speed, the unit will not produce maximum thrust).
Thrust Speed Performance
Bearing Lifetime
