X-VSR-SV1 Series
Low vacuum vertical stages with built-in controllers
Series Specifications
Download Datasheet| Built-in Controller |  |
| Travel Range | 20 – 40 mm |
| Manual Control |  |
| Axes of Motion | 1 |
| Weight | 0.56 – 0.77 kg |
| Accuracy (unidirectional) | 35 – 50 µm |
| Loaded Accuracy (10 N) | 20 – 35 µm |
| Repeatability | < 1 µm (< 0.000039") |
| Loaded Backlash (10 N) | < 10 µm (< 0.000394") |
| Backlash | < 35 µm (< 0.001378") |
| Straightness of Travel | < 30 – < 35 µm |
| Pitch | 0.08° (1.396 mrad) |
| Roll | 0.08° (1.396 mrad) |
| Yaw | 0.08° (1.396 mrad) |
| Microstep Size (Default Resolution) | 0.09525 µm |
| Default Resolution | 1/64 of a step |
| Peak Thrust | 200 N (44.9 lb) |
| Maximum Continuous Thrust | 100 N (22.4 lb) |
| Maximum Centered Load | 100 N (22.4 lb) |
| Maximum Moment (Pitch) | 3 N⋅m (2.2 lb⋅ft) |
| Maximum Moment (Roll) | 3 N⋅m (2.214 lb⋅ft) |
| Maximum Moment (Yaw) | 3 N⋅m (2.214 lb⋅ft) |
| Maximum Speed | 28 mm/s (1.102"/s) |
| Minimum Speed | 0.000058 mm/s (0.000002"/s) |
| Speed Resolution | 0.000058 mm/s (0.000002"/s) |
| Limit or Home Sensing | Magnetic home sensor |
| Linear Motion Per Motor Rev | 1.2192 mm (0.048") |
| Motor Steps Per Rev | 200 |
| Motor Type | Stepper (2 phase) |
| Motor Rated Current | 700 mA/phase |
| Motor Winding Inductance | 8.7 mH/phase |
| Communication Interface | RS-232 |
| Communication Protocol | Zaber ASCII (Default), Zaber Binary |
| Data Cable Connection | Teflon flying leads with M8 4 pin M/F |
| Power Supply | 24-48 VDC |
| Power Plug | None, use X-PIB |
| Maximum Current Draw | 950 mA |
| Guide Type | Varies |
| Mechanical Drive System | Precision Lead Screw |
| Mounting Interface | M6 and M3 threaded holes |
| Operating Temperature Range | 0-50 °C |
| CE Compliant | |
| Vacuum Compatible | Low vacuum (10-3 Torr) |
Filter By Feature
Choose one or more options below to filter the parts table.
X-VSRTravel: 20, not selectedLead Screw Options: AOptions: -SV1
Showing 2 of 2 parts.Lead Screw Options
Options
Part Specifications Comparison
| Part Number | Travel Range | Weight | Accuracy (unidirectional) | Loaded Accuracy (10 N) | Straightness of Travel | Guide Type |
|---|---|---|---|---|---|---|
| X-VSR20A-SV1 | 20 mm (0.787") | 0.56 kg (1.235 lb) | 50 µm (0.001968") | 35 µm (0.001378") | < 30 µm (< 0.001181") | Ball Bearing |
| X-VSR40A-SV1 | 40 mm (1.575") | 0.77 kg (1.698 lb) | 35 µm (0.001378") | 20 µm (0.000787") | < 35 µm (< 0.001378") | Crossed-Roller Bearing |
Specification Charts & Notes
Thrust or torque is a function of speed. The values given above are maximums. These values cannot both be achieved simultaneously (i.e. at maximum speed, the unit will not produce maximum thrust).
Thrust Speed Performance
Typical Accuracy
Duty Cycle
