View source for Template:X-Series/7/Conventions

== Conventions used throughout this document ==
*<tt>Fixed width</tt> type indicates communication to and from a device. The <tt>&crarr;</tt> symbol indicates a carriage return, which can be achieved by pressing enter when using a terminal program. {{#ifeq: {{{Binary}}}|no||
*An [https://www.zaber.com/support/protocol-manual.html?protocol=ASCII ASCII command] followed by (T:xx) indicates a legacy T-Series [https://www.zaber.com/support/protocol-manual.html?protocol=Binary Binary Protocol] command that achieves the same result. For example,
*:<tt>move abs 10000 (T:20:10000)</tt> shows that a move abs ASCII command can also be achieved with Binary command number 20.
: Not all ASCII commands have an equivalent Binary counterpart.|}}
{{#ifeq: {{{Motor}}}| multi|* When referring to commands that involve physical distances, this manual uses the term 'increments'. For stepper motor products, this term refers to the microstep size of the positioner. For non-stepper devices, the term refers to the size of an encoder count. See the [https://www.zaber.com/protocol-manual#topic_physical_units command protocol] for more details.|<span></span>}}