Template:X-Series/Precautions/ASR

From ZaberWiki
Jump to navigation Jump to search



Zaber’s motion control devices are precision instruments and must be handled with care. In particular, moving parts must be treated with care. Avoid axial loads in excess of the rated thrust load, axial and radial impact, dust and other contaminants and damage to the lead screw thread. These will reduce the performance of the device below stated specifications.

Noise Emissions

The A-weighted emission sound pressure level (SPL) of this device does not exceed 70 dB(A) during intended use.

The A-weighted emission sound pressure level (SPL) of this device may reach up to 79 dB(A) if the stage is stalled.