All images are shown looking into the device.
|1||24 - 48 V|
|2||GND (Note: Zaber's power supplies ground this pin to AC Earth)|
Note: To prevent damage to the device due to static buildup, the device should be properly grounded. The power supplies Zaber provides for X-Series devices are non-isolated and thus ground the device chassis to Earth via the negative terminal of the power supply. If for any reason you are using an isolated power supply, please ensure your device is grounded by connecting the negative terminal of the power connector to AC Earth.
|1||Power (max 4 A)||Power (max 4 A)|
- Default Settings
- Baud rate: 115200
- Protocol: Zaber ASCII
- Supported Protocols: Zaber ASCII, Zaber Binary
- Supported baud rates: 9600, 19200, 38400, 57600, 115200
- Bits: 8
- Parity: None
- Stop Bits: 1
- Flow Control: None