T-Series/Commands/Set Hold Current/Motorized NMC Devices/Percentage Current Setting
< T-Series | Commands | Set Hold Current | Motorized NMC Devices
Jump to navigation
Jump to search
The value of the hold current setting is in 20 mA DC increments. As an example, to convert a desired hold current of 800 mA DC into a data value for this setting:
- data value = 800 mA DC ÷ 20 mA DC/data = 40
To determine the actual current given the data value 40:
- current = 40 × 20 mA DC/data = 800 mA DC
