T-Series/Commands/Return Power Supply Voltage

From ZaberWiki
Jump to navigation Jump to search

Return Power Supply Voltage - Cmd 52

Warning: This is an "include" page. As such, its contents may be included in multiple other pages. To see a list of all pages that include this page, click on "What links here" in the bottom left navbar. If you make changes to this page, be sure that your changes are appropriate to all pages on which this content will be included. You are also encouraged to review our Zaber Wiki Editing Guidelines. This header will not be included in other pages.


Instruction Name Return Power Supply Voltage
Applies to All Zaber devices
Firmware Version 5.00 and up
Command Number 52
Command Type Read-Only Setting
Command Data Ignored
Reply Data Voltage
Safe to retry? Yes
Returns Current Position? No
Persistence n/a
Summary Returns the voltage level of the device's power supply.

A decimal is assumed before the last digit. For example, a value of 127 indicates 12.7 V. Note that the internal voltage measurement is not very accurate. Don't be alarmed if the indicated voltage is slightly different from your measurements.