T-Series/Commands/Manual Move Tracking/T-Series Motorized Devices
< T-Series | Commands | Manual Move Tracking
Jump to navigation
Jump to search
Warning: This is an "include" page. As such, its contents may be included in multiple other pages. To see a list of all pages that include this page, click on "What links here" in the bottom left navbar. If you make changes to this page, be sure that your changes are appropriate to all pages on which this content will be included. You are also encouraged to review our Zaber Wiki Editing Guidelines. This header will not be included in other pages.
| Instruction Name | Manual Move Tracking |
|---|---|
| Applies to | T-Series motorized devices |
| Firmware Version | 5.xx |
| Command Number | 10 |
| Command Type | Reply |
| Command Data | n/a |
| Reply Data | Position |
| Safe to retry? | Yes |
| Returns Current Position? | Yes |
| Persistence | n/a |
| Summary | A reply that is sent when the manual control knob is turned. |
Manual Move Tracking has been enabled (see Set Device Mode (Cmd 40)) and the device has been moved manually (the knob is turned). In this mode, the device sends this reply every 0.25 seconds updating the current absolute position (in microsteps) during any move.
