- 200 or 300 mm travel
- 540 N peak thrust
- Up to 65 mm/s speed
- Ball screw driven
- Inline and parallel drive configurations
- Encoder position feedback with slip/stall detection and automatic recovery
- Built-in controller; daisy chains with other A-Series and T-Series products
Zaber's A-BAR-E Series products are computer controlled, motorized, ball screw driven electric cylinders with integrated feedback encoders. They are stand-alone units requiring only a standard 48 V power supply. Each device is available in either an inline or parallel drive configuration. A built-in encoder allows closed-loop operation and slip/stall recovery features. An indexed knob provides convenient manual control for versatile operation even without a computer.
These actuators connect to the RS-232 port of any computer and can be chained with up to 254 units per chain. They can also be chained with any other A-Series or T-Series products. Convenient 6-pin mini din cables on the unit allow for direct interconnection between units in close proximity. For longer distances, standard cable extension can be used.
Specification Charts and Notes
Thrust or torque is a function of speed. The values given above are maximums. These values cannot both be achieved simultaneously (i.e. at maximum speed, the unit will not produce maximum thrust).