(Discontinued) T-LLS Series

Motorized dovetail slides with built-in controllers

About This Series

For XY and XYZ configurations, we recommend the X-LSQ Series. X-LSQ slides are designed for higher load, heavier duty, and can be mounted in XY or XYZ configuration without additional hardware.

T-LLS features
  1. An optional knob provides smooth manual control at variable speeds in both directions.
  2. Control all units in the daisy-chain via serial port (with a T-DSUB9 adaptor) or USB (with a T-USBDC cable)
  3. Daisy-chain additional units without additional cables. Power can also be shared in the chain.
  4. All of Zaber's T-Series products have integrated stepper motor controller and motor driver!
  5. Integrated 200 step/rev stepper motor with hall effect home sensor and software range limit.
  6. T-LLS Motorized dovetail slides are a simple and cost-effective way to automate experiments.
  7. Available in 105 and 260 mm travel.
Application Engineer
Have a Question?

Contact us for device selection, troubleshooting & more!

Response time promise: 1 business day

Application Engineer
Have a Question?
Have a Question?

Easy Set-Up

Zaber's devices can share both data and power through a daisy-chain, which reduces cabling and makes set-up as easy as 1, 2, 3:

  1. Connect the Zaber device to your computer via USB or RS-232 port.
  2. Connect the power supply to your Zaber device.
  3. Send instructions or automate your set-up using the Zaber Launcher.
Photo instructions of Typical Daisy-Chaining

For more details on daisy-chaining, read our technical article, "Daisy-chaining Data and Power to Reduce Cabling", or to determine which accessories you need for your system, try our Connection Guide Tool.

For additional information about setting up our devices, please visit our Support page, which includes our Getting Started Guide, Troubleshooting Guides, product user manuals, and other resources.