T-Series/LED functions/A-Series Closed-Loop Devices
Jump to navigation
Jump to search
LED functions
- A-Series Device LED Layout
| G | ||
| R | Y | B |
- Green - Power
- On: Device is operational
- Flashing at 2Hz: Power supply voltage or temperature is out of range
- Fading in and out slowly: Device is Parked. See Set Park State (Cmd 65)
- Yellow - Communication/Busy
- On: Device is moving, or traffic packets are being transferred on RS232 communication lines.
- Blinking: Device is under manual control via the knob (in Velocity mode). Blinking rate is proportional to movement speed.
- Blue - Slip/Stall
- On: Device is slipping
- 2 short flashes every 1 sec: The stationary device has been forced out of position
- On-Off cycle every 2 sec: The device has stalled and stopped
- Red - Error
- On/flashing: Device has lost its settings, or an error has occurred. Please contact technical support.