T-Series/Installation-Physical/Grounding/motion products/A-Series Closed-Loop Devices

Note: Encoder embedded devices are sensitive to electrically noisy environments. Static discharges can affect position calibration and cause unstable behaviour. If the device is behaving strangely, verify that the device is properly grounded, reset the device (either by the Reset (Cmd 0) command or by disconnecting then reconnecting power), then re-initialize the device with the Home (Cmd 1) command.

Warning: This is an "include" page. As such, its contents may be included in multiple other pages. To see a list of all pages that include this page, click on "What links here" in the bottom left navbar. If you make changes to this page, be sure that your changes are appropriate to all pages on which this content will be included. You are also encouraged to review our Zaber Wiki Editing Guidelines. This header will not be included in other pages.