T-Series/Commands/Set Maximum Range
From ZaberWiki
[edit] Set Maximum Range - Cmd 44
Warning: This is an "include" page. As such, its contents may be included in multiple other pages. To see a list of all pages that include this page, click on "What links here" in the bottom left navbar. If you make changes to this page, be sure that your changes are appropriate to all pages on which this content will be included. You are also encouraged to review our Zaber Wiki Editing Guidelines. This header will not be included in other pages.
| Instruction Name | Set Maximum Range |
|---|---|
| Firmware Version | 5.00 and up |
| Command Number | 44 |
| Command Type | Setting |
| Command Data | Range |
| Reply Data | Range |
| Persistence | Non-Volatile |
| Summary | Sets a limit on the range of travel up to 16777216. |
Use this command to limit the range of travel to a value other than the default. Exercise caution since using this command it is possible to set the range to a value greater than the physical limits of the device. The maximum range you can set is 16777216 microsteps.
This setting is stored in non-volatile memory and will persist after power-down or reset.
