T-Series/Commands/Read Register

Read Register - Cmd 5

Warning: This is an "include" page. As such, its contents may be included in multiple other pages. To see a list of all pages that include this page, click on "What links here" in the bottom left navbar. If you make changes to this page, be sure that your changes are appropriate to all pages on which this content will be included. You are also encouraged to review our Zaber Wiki Editing Guidelines. This header will not be included in other pages.

Instruction Name	Read Register
Applies to	A-Series devices
Firmware Version	6.xx
Command Number	5
Command Type	Command
Command Data	Register Address
Reply Data	Data
Safe to retry?	Yes
Returns Current Position?	No
Persistence	n/a
Summary	Reads from a register.

This command reads the data value from a register location.

NOTE: This command is meant for Zaber's internal use. Do not use this command unless directed to by Zaber technical support.