T-Series/Commands/Constant Speed Tracking

From ZaberWiki

[edit] Constant Speed Tracking - Cmd 8

Warning: This is an "include" page. As such, its contents may be included in multiple other pages. To see a list of all pages that include this page, click on "What links here" in the bottom left navbar. If you make changes to this page, be sure that your changes are appropriate to all pages on which this content will be included. You are also encouraged to review our Zaber Wiki Editing Guidelines. This header will not be included in other pages.

Instruction Name	Constant Speed Tracking
Firmware Version	5.00 and up
Command Number	8
Command Type	Reply
Command Data	n/a
Reply Data	Tracking Position
Persistence	n/a
Summary	Indicates to the user that the device has been set to a position tracking mode and given a move instruction.

The device has been set to position tracking mode (see Set Mode instruction) and given a move instruction. In this mode, the device sends this reply every 0.25 seconds updating the current absolute position (in microsteps) during any move.