New pages
Jump to navigation
Jump to search
8 May 2026
- 08:2808:28, 8 May 2026 Home Sensor Wiring Vacuum (hist | edit) [1,321 bytes] Mark (talk | contribs) (Created page with "===Home Sensor Wiring=== A Hall effect sensor is mounted in the device for use as a home sensor. It is part number A1122LUA-T made by Allegro. [http://www.allegromicro.com/~/media/Files/Datasheets/A112x-Datasheet.ashx Click here for data sheet]. Your controller should be configured so the stage stops immediately (little deceleration) when the home sensor is triggered. *Wire colour code: **3.6-24 Vdc input - red **Home signal - yellow **Ground - black The Hall sensor h...")
1 May 2026
- 15:3015:30, 1 May 2026 Manuals/LRT-ECM (hist | edit) [270 bytes] Lanarupp (talk | contribs) (Created page with "{{X-Series/7S/User_Manual|Device=LRT-ECM|Description=Motorized Linear Stages with BLDC Motors, Absolute Shaft Encoders and Dust Covers|Encoder=shaftabs|Brake=yes|Type=smartperipheral|Motor=bldc|ExternalHallSensor=no|Binary=yes|4pinIO=no|Away=no|Connector=T11A|EStop=no}}") originally created as "Manuals/LRT-ECMdraft"
29 April 2026
- 14:2714:27, 29 April 2026 Multi-axis/GE11 (hist | edit) [4,208 bytes] Dan (talk | contribs) (Created page with "==Installation of Gripper End Effector== ===Related Products=== {| |- valign="bottom" |200px|left|thumb|[https://www.zaber.com/products/controllers-joysticks/X-MCC X-MCC Universal Motor Controller] |200px|left|thumb|[https://www.zaber.com/products/accessories/GE11 GE11] |200px|left|thumb|[https://www.zaber.com/products/accessories/AP288 AP288] |} ===Precautions=== 30px ''...")
22 April 2026
- 10:0310:03, 22 April 2026 Multi-axis/AB289 (hist | edit) [842 bytes] Mark (talk | contribs) (Created page with "==Installing Y-Axis Connectors== ===Related Products=== {| |- valign="top" |200px|left|thumb|[https://www.zaber.com/search?query=AP246 AP246 LC40 Gantry Cable Guide Support, Quad Carriages] |200px|left|thumb|[https://www.zaber.com/search?query=AB289 AB289 LC40 Gantry Connector Bracket, Y-Axis, Quad Carriages] |} ===Required Tools=== *5 mm hex key ===Assembly=== <gallery widths="400px" heights="400px" perrow="3"> AP244AlignT-nut....")
23 March 2026
- 20:0520:05, 23 March 2026 Manuals/LRT-ECdraft (hist | edit) [251 bytes] Lanarupp (talk | contribs) (Created page with "{{X-Series/7S/User_Manual|Device=LRT-EC|Description=Motorized Linear Stages with Motor Encoders and Dust Covers|Encoder=multi|Brake=yes|Type=smartperipheral|Motor=multi|ExternalHallSensor=no|Binary=yes|4pinIO=no|Away=no|Connector=15pin|EStop=no}}")
16 March 2026
- 12:5312:53, 16 March 2026 Manuals/NMB-E (hist | edit) [234 bytes] Lanarupp (talk | contribs) (Created page with "{{X-Series/7S/User_Manual|Device=NMB-E|Description=BLDC Motors with Encoders and Optional Brakes|Encoder=ShaftAbs|Brake=yes|Type=smartperipheral|Motor=BLDC|ExternalHallSensor=yes|Binary=yes|4pinIO=no|Away=yes|Connector=T11A|EStop=no}}")