Manuals/Gantry Stages
Contents |
Disclaimer
Zaber’s devices are not intended for use in any critical medical, aviation, or military applications or situations where a product's use or failure could cause personal injury, death, or damage to property. Zaber disclaims any and all liability for injury or other damages resulting from the use of our products.
Precautions
Zaber’s motion control devices are precision instruments and must be handled with care. In particular, moving parts must be treated with care. Avoid axial loads in excess of the rated thrust load, axial and radial impact, dust and other contaminants and damage to the leadscrew thread. These will reduce the performance of the device below stated specifications.
Assembly/Mounting
All gantry stages are shipped disassembled to prevent damage to moving parts during transportation. Please find your model below for specific assembly instructions. Please note that the figures shown below represent only one of a number of possible mounting configurations. They are meant only as an example to show the general mounting procedures.
T-LSR Gantry Systems
The following are assembly instructions for T-LSR gantry systems.
Frame Assembly
Attaching Stages and Passive Rails
Data Cable and Power Supply Connections
T-LSM Gantry Systems
The following are assembly instructions for T-LSM gantry systems.
