Accessories

Accessories for Zaber's Precision Motion Control Products

Zaber product kits come with a basic set of accessories included. Additional accessories are described here.

Enter your part number to see which accessories are compatible with your motion control device or to find your accessory:

AP102-V

Specification Value
Part Number AP102-V
Short Description T-LSM-SV Top Adaptor Plate, Vacuum Compatible.
Note: Must be cleaned for high vacuum use.
Photo T-LSM-SV Top Adaptor Plate, Vacuum Compatible. <br> <strong>Note:</strong> Must be cleaned for high vacuum use.
Weight 0.06 kg
RoHS Status Compliant
Part Description

T-LSM-SV Top Adaptor Plate, Vacuum Compatible - These unanodized mounting plates are used to add a metric (M6 x 25 mm) grid to the top of Zaber's T-LSM-SV series vacuum motorized linear stages. This allows devices that mount to a metric grid to be used on top of the T-LSM-SV. This plate can also be used to increase the T-LSM-SV platform size.

Dimensions are available here. CAD file is here.

Lead Time 1-5 Days
Price (USD) $46.00  

Additional Accessories

Part Number Description Weight Lead Time Price
(USD)
AB90M Angle Bracket, 90 Degrees, Metric mounting holes

Angle Bracket, 90 Degrees, Metric mounting holes - These mounting brackets are designed for Zaber's A-LSQ Series, T-LS Series and T-LSR Series motorized linear slides, as well as TSB Series translation stages. The bracket has 15 tapped M6 holes, spaced 25 mm and 12.5 mm apart.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.16 kg 1-5 Days $108.00

AB90M-V Angle Bracket, 90 Degrees, Metric mounting holes, Vacuum-compatible

Angle Bracket, 90 Degrees, Metric mounting holes, Vacuum-compatible - These mounting brackets are designed for Zaber's TSB-V Series translation stages. The bracket has 15 tapped M6 holes, spaced 25 mm and 12.5 mm apart.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.16 kg 1-5 Days $108.00

AB90E Angle Bracket, 90 Degrees, Imperial mounting holes

Angle Bracket, 90 Degrees, Imperial mounting holes - These mounting brackets are designed for Zaber's A-LSQ Series, T-LS Series and T-LSR Series motorized linear slides, as well as TSB Series translation stages. The bracket has 15 tapped 1/4-20 holes, spaced 1" and 1/2" apart.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.16 kg 1-5 Days $108.00

AB103B Miniature Angle Bracket, 90 degrees

Miniature Angle Bracket, 90 degrees These mounting brackets offer more stiffness than AB103 brackets. These mounting brackets are designed for the T-LSM Series motorized linear slides. They can be used to add a platform to a stage mounted vertically, or they can be added to an XYZ system to increase stiffness. The bracket has a combination of M3 and M6 mounting holes. The T-NA Series linear actuators can also be mounted onto this angle bracket.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.05 kg 1-5 Days $74.00

AB117 Probe holder, 2-13 mm range

Probe holder - To hold probes from 2-13 mm in diameter. It is designed to mount to an AP116 or Zaber's LSM Series of linear stages. The bracket has 4 x mounting holes spaced 20 mm.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.08 kg 1-5 Days $154.00

AB120 Angle bracket, mounting foot

Angle bracket, mounting foot - These angle brackets are designed for Zaber's A-LAR Series and A-BAR Series motorized linear actuators.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.06 kg 1-5 Days $11.00

AB127 Clevis bracket, rear mount

Clevis bracket, rear mount - These clevis brackets are designed for Zaber's A-LAR and A-BAR Series, parallel drive, motorized linear actuators. Mounting to the back side of the actuator provides a 10 mm diameter clevis pivot.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.05 kg 1-5 Days $25.00

AB128 Rod eye bracket, rear mount

Rod eye bracket, rear mount - These rod end brackets are designed for Zaber's A-LAR and A-BAR Series, parallel drive, motorized linear actuators. Mounting to the back side of the actuator provides a 10 mm ID, ball bearing rod end.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.07 kg 1-5 Days $45.00

AB90E-V Angle Bracket, 90 Degrees, Imperial mounting holes, Vacuum-compatible

Angle Bracket, 90 Degrees, Imperial mounting holes, Vacuum-compatible - These mounting brackets are designed for Zaber's TSB-V Series translation stages. The bracket has 15 tapped 1/4-20 holes, spaced 1" and 1/2" apart.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.16 kg 1-5 Days $108.00

AB103 Miniature Angle Bracket, 90 Degrees

Miniature Angle Bracket, 90 Degrees - These mounting brackets are designed for the T-LSM series motorized linear slides. They can be used to add a platform to a stage mounted vertically, or they can be added to an XYZ system to increase stiffness. The bracket has a combination of M3 and M6 mounting holes. The T-NA series linear actuators can also be mounted onto this angle bracket.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.04 kg 1-5 Days $67.00

AB103-V Miniature Angle Bracket, 90 Degrees, Vacuum Compatible. <br> <strong>Note:</strong> Must be cleaned for high vacuum use

Miniature Angle Bracket, 90 Degrees, Vacuum Compatible - These unanodized mounting brackets are designed for the T-LSM-SV series vacuum motorized linear stages. They can be used to add a platform to a stage mounted vertically, or they can be added to an XYZ system to increase stiffness. The bracket has a combination of M3 and M6 mounting holes. The T-NA-SV series vacuum linear actuators can also be mounted onto this angle bracket.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.04 kg 1-5 Days $72.00

AB106 Micro Angle Bracket, 90 Degrees

Micro Angle Bracket, 90 Degrees - These mounting brackets are designed for the LSA series motorized linear stages. They are required to add a vertical Z-axis to an X- or XY- system. The AB106 can be used to add a platform to a stage mounted vertically. The bracket has a combination of M2 and M3 mounting holes, with an M4 central hole for an optical post.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.01 kg 1-5 Days $62.00

AB104 Angle bracket, 90 degrees, large, metric

Angle Bracket, 90 Degrees, Metric mounting holes - These mounting brackets are designed for Zaber's A-LST series motorized linear stages but can be used with many types of stages. The bracket has 25 tapped M6 holes, spaced 25 mm and 12.5 mm apart. Includes four M6 x 10 mm mounting screws.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.37 kg 1-5 Days $149.00

AP101 T-LSM Bottom Adaptor Plate

T-LSM Bottom Adaptor Plate - These mounting plates are used to mount the T-LSM series motorized linear slides to the top of the T-LSR series, A-LSQ series linear stages, or the T-RSW series rotary stages. They can also be used to attach a T-LSM to a standard metric (M6 x 25 mm) or imperial (1/4-20 x 1 inch) breadboard. For T-LSM stages with 100 mm travel or more, two AP101 brackets are recommended for mounting to a breadboard.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.07 kg 1-5 Days $37.00

AP101-V T-LSM-SV Bottom Adaptor Plate, Vacuum Compatible. <br> <strong>Note:</strong> Must be cleaned for high vacuum use.

T-LSM-SV Bottom Adaptor Plate - These unanodized mounting plates are used to mount the T-LSM-SV series vacuum motorized linear stages to a standard metric (M6 x 25 mm) or imperial (1/4-20 x 1 inch) breadboard. For T-LSM-SV stages with 100 mm travel or more, two AP101-V brackets are recommended for mounting to a breadboard.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.07 kg 1-5 Days $41.00

AP102 T-LSM Top Adaptor Plate

T-LSM Top Adaptor Plate - These mounting plates are used to add a metric (M6 x 25 mm) grid to the top of Zaber's T-LSM series motorized linear slides. They can also be used to mount the T-RSW series rotary stages to the top of the T-LSM.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.06 kg 1-5 Days $40.00

AP102-V T-LSM-SV Top Adaptor Plate, Vacuum Compatible. <br> <strong>Note:</strong> Must be cleaned for high vacuum use.

T-LSM-SV Top Adaptor Plate, Vacuum Compatible - These unanodized mounting plates are used to add a metric (M6 x 25 mm) grid to the top of Zaber's T-LSM-SV series vacuum motorized linear stages. This allows devices that mount to a metric grid to be used on top of the T-LSM-SV. This plate can also be used to increase the T-LSM-SV platform size.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.06 kg 1-5 Days $46.00

AP107 X-MCB2/A-MCB2 adaptor plate, comes with screws

This is a flat adaptor plate with two countersunk holes 100 mm apart and 6 mm slots 150 mm apart. This plate is designed to be attached to one of the edges of the A-MCB2 and X-MCB2 with M3 countersink screws, and in turn the A-MCB2 or X-MCB2 may be mounted to optical breadboard or housing with M6 holes 150 mm apart, or 1/4"-20 holes 6" apart.

RoHS Status: Compliant

0.03 kg 1-5 Days $31.00

AM108 ASR insert, universal

ASR insert, universal This 160 x 110 mm insert fits into the top plate of the ASR and ASR-E XY stages. It is held in place by a spring clip on the stage allowing quick changes between different inserts. The AM108 adjusts to hold different sized slides and dishes up to 70 mm in diameter.

RoHS Status: Compliant

0.14 kg 1-5 Days $461.00

AM109 ASR insert, multiwell plate

ASR insert, multiwell plate This 160 x 110 mm insert fits into the top plate of the ASR and ASR-E XY stages. It is held in place by a spring clip on the stage allowing quick changes between different inserts. The AM109 holds an SBS standard (127.5 x 85 mm) multiwell plate.

RoHS Status: Compliant

0.12 kg 1-5 Days $410.00

AP110 ASR adaptor plate, breadboard (includes two plates per order)

ASR adaptor plates, breadboard (sold in pairs) These mounting plates allow the ASR and ASR-E XY stages to be mounted to a standard metric (M6 x 25 mm) breadboard.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.42 kg 1-5 Days $97.00

AP111 ASR adaptor plate, universal microscope  (includes two plates per order)

ASR adaptor plates, universal microscope (sold in pairs) These mounting plates allow the ASR and ASR-E XY stages to be mounted to most Leica, Zeiss, and Olympus microscopes. If you are unsure as to whether or not the ASR stages will mount to your microscope, please contact a support engineer at contact@zaber.com.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.20 kg 1-5 Days $113.00

AP114 ASR adaptor plate, Nikon inverted microscope (includes two plates per order)

ASR adaptor plate, Nikon inverted microscope (sold in pairs) These mounting plates allow the ASR and ASR-E XY stages to be mounted to most Nikon inverted microscopes. If you are unsure as to whether or not the ASR stages will mount to your microscope, please contact a support engineer at contact@zaber.com.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.48 kg 1-5 Days $113.00

AB105 Mounting bracket for T-slots in LST stages

Mounting bracket for T-slots in LST stages - Mounts in T-slots of LST series and A-LST series. Provides unlimited mounting locations in axis of travel and 125 mm or 5" mounting from side to side.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.01 kg 1-5 Days $12.00

AL5012 Lens Adaptor -12mm/0.5

Lens Adaptor -12 mm/0.5" Optics - These adaptors are designed to be used with the T-MM2 Motorized Mirror Mount . These adaptors will hold 12 mm/0.5" optics, up to 13 mm thick.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.05 kg 1-5 Days $71.00

AL5025 Lens Adaptor -25mm/1

Lens Adaptor -25 mm/1" Optics - These adaptors are designed to be used with the T-MM2 Motorized Mirror Mount . These adaptors will hold 25 mm/1" optics, up to 13 mm thick.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.04 kg 1-5 Days $71.00

AL50C Lens Adaptor - C-mount

Lens Adaptor - C-mount - These adaptors are designed to be used with the T-MM2 Motorized Mirror Mount . These adaptors have female C-mount threads.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.03 kg 1-5 Days $26.00

AL5012-V Lens Adaptor -12 mm/0.5

Lens Adaptor - 12 mm/0.5" Optics, Vacuum Compatible - These adaptors are designed to be used with the T-MM2-V Low Vacuum Motorized Mirror Mount . These adaptors will hold 12 mm/0.5" optics, up to 13 mm thick.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.05 kg 1-5 Days $71.00

AL5025-V Lens Adaptor - 25 mm/1

Lens Adaptor - 25 mm/1" Optics, Vacuum Compatible - These adaptors are designed to be used with the T-MM2-V Low Vacuum Motorized Mirror Mount . These adaptors will hold 25 mm/1" optics, up to 13 mm thick.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.04 kg 1-5 Days $71.00

AL50C-V Lens Adaptor - C-mount, Vacuum Compatible

Lens Adaptor - C-mount, Vacuum Compatible - These adaptors are designed to be used with the T-MM2-V Low Vacuum Motorized Mirror Mount . These adaptors have female C-mount threads.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.03 kg 1-5 Days $26.00

AM126 ASR insert, metric breadboard

ASR insert, metric breadboard - This 160 x 110 mm insert fits into the top plate of the ASR and ASR-E XY stages. It is held in place by a spring clip on the stage as well as 4 optional M2 screws (included). The AM126 features a grid of M6 tapped holes on 25 mm spacing to allow the easy mounting of other Zaber devices or other accessories.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.32 kg 1-5 Days $205.00

AMB122 Actuator mounting bracket, side mount

Actuator mounting bracket, side mount - These mounting brackets are designed for Zaber's A-LAR and A-BAR series motorized linear actuators. To mount the actuator to a parallel surface, attach the bracket to the actuator, then to the surface using a 75 mm (3) hole spacing.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.04 kg 1-5 Days $25.00

AP116 360 Degrees Bracket

360 Degrees Bracket - Used for angular adjustment between LSM Series devices. The bracket has 4 x mounting holes spaced 20 mm.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.08 kg 1-5 Days $154.00

AP121 Adaptor plate, front mount

Adaptor plate, front mount - These adaptor plates are designed for Zaber's A-LAR and A-BAR Series motorized linear actuators. The adaptor plate can be easily mounted using the ISO 15552 mounting pattern on the front of the actuator.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.07 kg 1-5 Days $25.00

AP125 ASR adaptor plate, Olympus BX microscopes

ASR adaptor plate, Olympus BX microscopes - This adaptor plate allows the ASR and ASR-E XY stages to be mounted to Olympus BX series upright microscopes. If you are unsure as to whether or not the ASR stages will mount to your microscope, please contact a support engineer at contact@zaber.com.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.42 kg 1-5 Days $360.00

AP129 X-MCB1 adaptor plate, comes with screws

This is a flat adaptor plate with two countersunk holes 50 mm apart and 6 mm slots 100 mm apart. This plate is designed to be attached to one of the edges of the X-MCB1 with M3 countersink screws, and in turn the X-MCB1 may be mounted to optical breadboard or housing with M6 holes 100 mm apart, or 1/4"-20 holes 4" apart.

RoHS Status: Compliant

0.02 kg 1-5 days $24.00

AT118 Actuator tip, rod clevis

Actuator tip, rod clevis - These actuator tips are designed for Zaber's A-LAR and A-BAR Series motorized linear actuators. The actuator tip attaches directly to the tip of the actuator with an M10 x 1.25 internal thread. The clevis has a 10 mm pivot pin.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.09 kg 1-5 Days $15.00

AT119 Actuator tip, rod eye

Actuator tip, rod eye - These actuator tips are designed for Zaber's A-LAR and A-BAR Series motorized linear actuators. The actuator tip attaches directly to the tip of the actuator with an M10 x 1.25 internal thread. The rod end has a 10 mm through hole.

Dimensions are available here. CAD file is here.

RoHS Status: Compliant

0.08 kg 1-5 Days $28.00

AMB095 Actuator Mounting Bracket, 9.5 mm diameter

Actuator Mounting Bracket, 9.5 mm diameter - These mounting brackets are used to attach our T-LA series and T-NA series actuators (with 9.5 mm mounting shank) to our TSB series translation stages, or to your own equipment. A setscrew on the contact bracket adjusts the relative position of the stage with respect to the actuator extension.

Dimensions are available here.

RoHS Status: Compliant

0.04 kg 1-5 Days $74.00

AMB140 Actuator Mounting Bracket, 14.0 mm diameter

Actuator Mounting Bracket, 14.0 mm diameter - These mounting brackets can be used to attach our NA11 series actuators (with 14 mm mounting shank) to our TSB series translation stages, or to your own equipment. A setscrew on the contact bracket adjusts the relative position of the stage with respect to the actuator extension.

Dimensions are available here.

RoHS Status: Compliant

0.04 kg 1-5 Days $108.00

MB06 Motor extension cable with bare ends, 6 ft, for 3rd party controller

Motor extension cable, 6 ft, for use with 3rd party controller - 8 pin mini-din male to bare wire extension cable for use between a two-phase stepper motor controller and compatible motorized peripherals such as the NM series and RS60 series.

RoHS Status: Compliant

0.08 kg 1-5 Days $26.00

MC03 Motor extension cable, 5 ft, for use with A- and X-Series controllers

Motor extension cable, 5 ft, for use with A- and X-Series controllers - This is a standard 15 pin D-sub male to female extension cable. Thumbscrews on male and female connectors provide locking connections to the A-MCB2 controller, X-MCB2 controller, X-MCB1 controller, and motorized devices with T3 termination. For further cable length extension, please use this cable along with multiples of MC04.

RoHS Status: Compliant

0.17 kg 1-5 Days $16.00

MC04 Motor extension cable, 5 ft, for use with A- and X-Series controllers

Motor extension cable, 5 ft, for use with A- and X-Series controllers - This is a 15 pin D-sub male to female extension cable with reversed locking hardware on the female connector. Thumbscrews on male connector and screw-lock sockets on female connector provide locking connections to the A-MCB2 controller, X-MCB1 controller, X-MCB2 controller, and motorized devices with T4 termination. Multiples of this cable can be used for MC03 or MC04 cable length extension.

RoHS Status: Compliant

0.17 kg 1-5 Days $16.00

MC06 Motor extension cable, 6 ft, for use with T-MCA Series

Motor extension cable, 6 ft, for use with T-MCA Series peripherals - This is a standard 8 pin mini-din male to female extension cable for use between a T-MCA Series stepper controller and compatible motorized peripherals such as the NM Series and RS60 Series.

RoHS Status: Compliant

0.08 kg 1-5 Days $12.00

U-DC06 Data Cable, 6 ft, USB A to B connector

Data cable, 6 ft - For use with select A-Series products. This is a standard USB A to B cable to go from the computer to the device.

RoHS Status: Compliant

0.10 kg 1-5 Days $10.00

U-DC16 Data Cable, 16 ft, USB A to B

Data cable, 16 ft - For use with select A-Series products. This is a standard USB A to B cable to go from the computer to the device.

RoHS Status: Compliant

0.18 kg 1-5 Days $18.00

DTB4 Data terminal block, 4 pin, 3.5 mm pitch, for use with A-MCB2 and X-MCB2

Data terminal block - This is a 4-pin, 3.5 mm pitch screw terminal block used in the RS-485 terminal of A-MCB2 and X-MCB2.

RoHS Status: Compliant

0.01 kg 1-5 Days $4.00

DTB10 Data terminal block, 10 pin, 3.5 mm pitch, for use with X-MCB1

This is a 10-pin, 3.5 mm pitch screw terminal block used in the I/O terminal of X-MCB1.

RoHS Status: Compliant

0.01 kg 1-5 days $10.00

CDMC8 Chopper driver motor connector, 8 pin minidin male

Chopper drive motor connector, 8 pin minidin male - This connector allows users to wire their own bipolar stepper motors to T-MCA series chopper drive controllers.

RoHS Status: Compliant

0.01 kg 1-5 Days $7.00

DTB5 Data terminal block, 5 pin, 3.5 mm pitch, for use with A-MCB2 and X-MCB2

Digital data terminal block - This is a 5-pin, 3.5 mm pitch screw terminal block used in the digital I/O terminal of A-MCB2 and X-MCB2.

RoHS Status: Compliant

0.01 kg 1-5 Days $6.00

DTB6 Data terminal block, 6 pin, 3.5 mm pitch, for use with A-MCB2 and X-MCB2

Analog data terminal block - This is a 6-pin, 3.5 mm pitch screw terminal block used in the analog I/O terminal of A-MCB2 and X-MCB2.

RoHS Status: Compliant

0.01 kg 1-5 Days $8.00

PP21 Power plug, 2.1 mm

Power plug, 2.1 mm centre positive - This plug is used to connect a customer's own power supply (of appropriate voltage and current capability) to Zaber T-Series products that take 12-16 V.

RoHS Status: Compliant

0.01 kg 1-5 Days $3.00

PMF3 Power Plug, Mini-Fit Jr. 3 pin

Power plug, Mini-Fit Jr. 3 pin - This plug is used to connect a customer's own power supply (of appropriate voltage and current capability) to Zaber's A-Series or T-Series products that take 24-48 V.

RoHS Status: Compliant

0.02 kg 1-5 Days $12.00

PTB3 Power terminal block, 3 pin, 5mm pitch, for use with A-MCB2 with custom power supply

This is a 3-pin, 5 mm pitch screw terminal block used in the power input terminal of A-MCB2.

RoHS Status: Compliant

0.01 kg 1-5 Days $5.00

HSM8 Home sensor with M8 connector

Small, fully-encased Hall effect sensor - Fits a 4 mm t-slotted extrusion. An on-board LED indicates when the switch has been triggered.

Dimensions are available here

RoHS Status: Compliant

0.01 kg 1-5 Days $41.00

PS01-15V04  Power supply, 15 V DC 0.4 A out, 110 V AC in, plug for North America

This is a regulated 110 V-120 V AC input power supply. Output is 15 V DC at up to 400 mA on a 2.1 mm center positive plug. It is conveniently sized so that multiple power supplies will fit adjacent to each other on a standard power bar. This power supply is included with the KT01 kit. It is capable of running multiple 15 V devices as long as the combined current draw is less than 400 mA. Power is transmitted to additional devices through the data cables.

RoHS Status: Compliant

0.08 kg 1-5 Days $18.00

PS03-15V12U Power supply, 15 V DC 1.2 A out, 100-240 V AC in, Universal plug adaptors

This is a regulated 100-240 V AC input power supply with 15 V DC, 1.2 A output on a 2.1 mm center positive power plug. Adaptors are included for use in most countries: Type A (American/Japanese 2 pin), Type C (Europlug), Type G (British), Type I (Australian/Chinese). This power supply is included with the KT03 kit. It is capable of running multiple 15 V devices as long as the combined current draw is less than 1200 mA. Power is transmitted to additional devices through the data cables.

RoHS Status: Compliant

0.18 kg 1-5 Days $18.00

PS04-15V26 Power supply, 15 V DC 2.67 A out, 100-240 V AC in, plug for North America. International plug adaptor included on request.

Regulated 100 - 240 V AC input power supply with 15 V DC, 2.67 A output on a 2.1 mm (centre positive) power plug. This power supply is included with the KT04 kit. It is capable of running up to four 15 V devices as long as the combined current draw is less than 2600 mA. Power is transmitted to additional devices through the data cables.

RoHS Status: Compliant

0.42 kg 1-5 Days $62.00

PS05-24V25 Power supply, 24 V DC 2.5 A out, 100-240 V AC in, plug for North America

This is a regulated 100 - 240 V AC input power supply with 24 V DC, 2.5 A output on a Molex Mini-Fit Jr. 3-pin power plug. This power supply is included with the KT05 kit. Comes with a 30 cm (1') long cable with eyelet for optional grounding.

RoHS Status: Compliant

0.39 kg 1-5 Days $62.00

PS07-48V12 Power supply, 48 V DC 1.25 A out, 100-240 V AC in, plug for North America

Regulated 100 - 240 V AC input power supply with 48 V DC, 1.25 A output on a Molex Mini-Fit Jr. 3-pin power plug. This power supply is included with the KT07 kit. Comes with a 30 cm (1') long cable with eyelet for optional grounding.

RoHS Status: Compliant

0.45 kg 1-5 Days $62.00

PS09-48V33 Power Supply, 48 V 3.3 A, compatible with A-MCB2

This is a regulated, 100 - 240 VAC input power supply with 48 VDC, 3.3 A output on a 3-pin 5 mm pitch terminal block

RoHS Status: Compliant

0.86 kg 1-5 Days $123.00

PS10-24V25 Power Supply, 24 V 2.5 A, compatible with A-MCB2

This is a regulated, 100 - 240 VAC input power supply with 24 VDC, 2.5 A output on a 3-pin 5 mm pitch terminal block

RoHS Status: Compliant

0.50 kg 1-5 Days $62.00

S-DC06 Data Cable, 6 ft, DSUB9 connector

Data cable, 6 ft, for use with select A-Series products - This is a standard DSUB9 male to female extension cable to go to the computer or between devices in the daisy chain.

RoHS Status: Compliant

0.14 kg 1-5 Days $10.00

T-DC06 Data cable, 6 ft, for use with all T-Series and A-Series products

Data cable, 6 ft, for use with all T-Series and A-Series products - This is a standard 6 pin mini-din male to female PS/2 extension cable to go to the computer or between devices in the daisy chain.

RoHS Status: Compliant version available

0.08 kg 1-5 Days $10.00

T-DC15 Data cable, 15 ft, for use with all T-Series and A-Series products

Data cable, 15 ft, for use with all T-Series and A-Series products - This is a standard 6 pin mini-din male to female PS/2 extension cable to go to the computer or between devices in the daisy chain.

RoHS Status: Compliant

0.13 kg 1-5 Days $18.00

T-DC25 Data cable, 25 ft, for use with all T-Series and A-Series products

Data cable, 25 ft, for use with all T-Series and A-Series products - This is a standard 6 pin mini-din male to female PS/2 extension cable to go to the computer or between devices in the daisy chain.

RoHS Status: Compliant

0.21 kg 1-5 Days $24.00

T-DSUB9 Serial adaptor

Serial adaptor - This adaptor is needed to connect T-Series and A-Series devices to a standard 9 pin D-sub male RS-232 serial port. Only one is needed per computer.

RoHS Status: Compliant

0.02 kg 1-5 Days $12.00

T-DSUB9-P Serial adaptor with power input

Serial adaptor with power input - This adaptor can be used to replace the T-DSUB9 for connecting T-Series devices to your serial port. The only difference is the addition of a power connector. Connecting the power supply to the adaptor rather than the device reduces cable clutter and is useful for vacuum applications where fewer cable connections to the device are desired.

Please note: This adaptor is only compatible with devices requiring a 15 V power supply.

RoHS Status: Compliant

0.04 kg 1-5 Days $24.00

PS11-24V15 Power Supply, 24 V 1.5 A, compatible with X-Series Products

This is a regulated, non-isolated, 100 - 240 VAC input power supply with a 24 VDC, 1.5 A output on a 2-pin 5 mm pitch terminal block. Suitable for powering a single X-Series product with a smaller motor.

RoHS Status: Compliant

0.35 kg 1-5 Days $24.00

PS12-24V30 Power Supply, 24 V 3.0 A, compatible with X-Series Products

This is a regulated, non-isolated, 100 - 240 VAC input power supply with a 24 VDC, 3.0 A output on a 2-pin 5 mm pitch terminal block. Suitable for powering several X-Series products with smaller motors over a daisy-chain.

RoHS Status: Compliant

0.44 kg 1-5 Days $36.00

PS13-48V12 Power Supply, 48 V 1.25 A, compatible with X-Series Products

This is a regulated, non-isolated, 100 - 240 VAC input power supply with a 48 VDC, 1.25 A output on a 2-pin 5 mm pitch terminal block. Suitable for powering a single lower current X-Series product.

RoHS Status: Compliant

0.44 kg 1-5 Days $24.00

PS14-48V37 Power Supply, 48 V 3.75 A, compatible with X-Series Products

This is a regulated, non-isolated, 100 - 240 VAC input power supply with a 48 VDC, 3.75 A output on a 2-pin 5 mm pitch terminal block. Suitable for powering a single high current X-Series product or several lower current X-Series products over a daisy-chain.

RoHS Status: Compliant

0.75 kg 1-5 Days $80.00

PTB2 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply

This plug is used to connect a customer's own power supply (of appropriate voltage and current capability) to Zaber's X-Series products that take 24-48 V.

RoHS Status: Compliant

0.01 kg 1-5 Days $5.00

T-USB USB to RS-232 converter

USB to serial converter - This converts a USB port into an RS-232 serial port. Our products are controlled through your computer's serial port. If you have no available serial ports, use this converter to create one from a free USB port.

RoHS Status: Compliant

0.03 kg 1-5 Days $42.00

S-XDC X-Series to A-MCB2 adaptor cable

This 6 ft (2 m) conversion cable has an RS-232 male connector on one end and an M8 male connector on the other. It allows an A-MCB2 to connect in a daisy-chain after an X-Series product. The cable only transfers communication; the devices on each end of the conversion cable must have their own power supplies.

RoHS Status: Compliant

0.11 kg 1-5 Days $16.00

T-USBDC USB to serial converter, with mini-din 6 female plug

USB to serial converter - This 6 ft data cable allows you to connect the previous port of your T-Series and A-Series devices directly to a USB port on your computer. It has a 6 pin mini-din female plug on one end and a USB A plug on the other.

RoHS Status: Compliant

0.06 kg 1-5 Days $40.00

T-XDC X-Series to A-Series / T-Series adaptor cable

This 8 inch (200 mm) conversion cable has an M8 male connector on one end and a 6 pin mini-din female connector on the other. It allows an A-Series (except A-MCB2) or T-Series product to connect in a daisy-chain after an X-Series product. The cable only transfers communication; the devices on each end of the conversion cable must have their own power supplies.

RoHS Status: Compliant

0.03 kg 1-5 Days $16.00

X-DC02 Data Cable, 2 ft (0.6 m), for use with all X-Series products

This is a 2 ft (0.6 m) standard 4-pin male to female M8 extension cable to daisy chain smaller X-Series products. The maximum current carrying capacity of the cable is 3.0 Amps.

RoHS Status: Compliant

0.04 kg 1-5 Days $12.00

X-DC06 Data Cable, 6 ft (2 m), for use with all X-Series products

This is a 6 ft (2 m) standard 4-pin male to female M8 extension cable to daisy chain larger X-Series products, or to extend a data connection. The maximum current carrying capacity of the cable is 3.0 Amps.

RoHS Status: Compliant

0.08 kg 1-5 Days $16.00

X-DC15 Data Cable, 15 ft (5 m), for use with all X-Series products

This is a 15 ft (5 m) standard 4-pin male to female M8 extension cable for extending X-Series connections. The maximum current carrying capacity of the cable is 3.0 Amps.

RoHS Status: Compliant

0.17 kg 1-5 Days $20.00

X-DC25 Data Cable, 25 ft (7.6 m), for use with all X-Series products

This is a 25 ft (7.6 m) standard 4-pin male to female M8 extension cable for extending X-Series connections. The maximum current carrying capacity of the cable is 3.0 Amps.

RoHS Status: Compliant

0.27 kg 1-5 Days $24.00

X-SDC Serial adaptor cable with M8 female plug for X-Series products

This 6 ft (2 m) M8 female to RS-232 female conversion cable allows you to connect the previous port of your X-Series product to an RS-232 serial port on your computer. Only one is needed per X-Series daisy-chain.

RoHS Status: Compliant

0.09 kg 1-5 Days $16.00

X-TDC A-Series / T-Series to X-Series adaptor cable

This 8 inch (200 mm) conversion cable has a 6 pin mini-din male connector on one end and an M8 female connector on the other. It allows an X-Series product to connect in a daisy-chain after an A-Series (except A-MCB2) or T-Series product. The cable only transfers communication; the devices on each end of the conversion cable must have their own power supplies.

RoHS Status: Compliant

0.03 kg 1-5 Days $16.00

X-USBDC USB to serial converter cable with M8 female plug for X-Series products

This 6 ft (2 m) M8 female to USB A plug conversion cable allows you to connect the previous port of your X-Series product to a USB port on your computer. Only one is needed per X-Series daisy-chain. See the Software page for driver download.

RoHS Status: Compliant

0.06 kg 1-5 Days $40.00

T-SOFTWARE Software CD (optional, content available free online)

All of our documentation and software is available for free download from our website. Because it is important to us to minimize any negative impact on the environment and on the health and safety of our communities, we have chosen not to include printed manuals and a CD with our shipments. However, if you cannot access our support website or require a CD for any other reason, we will compile the latest documentation and software onto a CD for you to purchase.

RoHS Status: Compliant

0.03 kg 1-5 Days $10.00

CATALOGUE Zaber's latest product catalogue

We will ship you a free catalogue if you click "Buy/Quote", and fill in your information. Alternatively, you can download a PDF version.

Click Here to Download.

RoHS Status: Exempt

0.40 kg 2-5 days $0.00

Linear Actuators

Linear Stages

Vertical Stages

Micromanipulators

Rotary Devices

Stepper Motors

Tilt Devices

Multi-Axis Systems

Vacuum Devices

Controllers & Joysticks


Quick Survey

If you are already a user of Zaber products, please briefly describe your application.

I use my Zaber product(s) for...