| Part Number |
|
Description |
Weight |
Lead Time |
Price (USD) |
|
AB90-M
|
|
Angle Bracket, 90 Degrees, Metric mounting holes - These mounting brackets are designed for Zaber's T-LS series motorized linear slides, as well TSB series translation stages. Bracket has 15 tapped M6 holes, spaced 25mm and 12.5mm apart. Dimensions are available here. IGES file is here.
RoHS Status:
Compliant
|
0.16 kg
|
2-5 Days |
$105.00
|
|
|
AB90-I
|
|
Angle Bracket, 90 Degrees, Imperial mounting holes - These mounting brackets are designed for Zaber's T-LS series motorized linear slides, as well TSB series translation stages. Bracket has 15 tapped 1/4-20 holes, spaced 1" and 1/2" apart. Dimensions are available here. IGES file is here.
RoHS Status:
Compliant
|
0.16 kg
|
2-5 Days |
$105.00
|
|
|
AMB095
|
|
Actuator Mounting Bracket, 9.5 mm diameter - These mounting brackets are used to attach our T-LA series actuators (with 9.5 mm mounting shank) to our TSB series translation stages, or to your own equipment. A setscrew on the contact bracket adjusts the relative position of the stage with respect to the actuator extension. Dimensions are available here.
RoHS Status:
Compliant
|
0.04 kg
|
2-5 Days |
$72.00
|
|
|
AMB140
|
|
Actuator Mounting Bracket, 14.0 mm diameter - These mounting brackets can be used to attach our NA11 series actuators (with 14 mm mounting shank) to our TSB series translation stages, or to your own equipment. A setscrew on the contact bracket adjusts the relative position of the stage with respect to the actuator extension. Dimensions are available here.
RoHS Status:
Compliant
|
0.04 kg
|
2-5 Days |
$105.00
|
|
|
SUB-AMB140
|
|
Substitute Actuator Mounting Bracket, 14.0 mm diameter - Normally our TSB series translation stages comes with 9.5 mm mounting brackets. Add this part number to your order if you plan to use our TSB translation stages with our NA11 series actuators, which has 14 mm mounting shank).
RoHS Status:
Compliant
|
0.00 kg
|
2-5 Days |
$33.00
|
|
|
CDC6
|
|
Motor extension cable, 6ft, for use with T-CD series - This is a standard 8 pin mini-din male to female extension cable for use between a T-CD series stepper controller and compatible motorized devices such as the NA, NM, and LM series.
RoHS Status:
Non-compliant
|
0.08 kg
|
2-5 Days |
$12.00
|
|
|
CDMC8
|
|
Chopper drive motor connector, 8 pin minidin male - This connector allows users to wire their own bipolar stepper motors to T-CD series chopper drive controllers.
RoHS Status:
Non-compliant
|
0.01 kg
|
2-5 Days |
$7.00
|
|
|
PP21
|
|
Power plug, 2.1mm - This plug can be used to connect a customer's own power supply (of appropiate voltage and current capabilty) to Zaber T-Series products.
RoHS Status:
Pending
|
0.01 kg
|
2-5 Days |
$3.00
|
|
|
PS15V04
|
|
This is a regulated 110V-120V AC input power supply. Output is 15V DC at up to 400mA on a 2.1mm center positive plug. It is conveniently sized so that multiple power supplies will fit adjacent to each other on a standard power bar. This power supply is included with some device kits (KT part numbers). It is capable of running multiple devices as long as the combined current draw is less than 400mA. Power is transmitted to additional devices through the data cables.
RoHS Status:
Compliant
|
0.08 kg
|
2-5 Days |
$18.00
|
|
|
PS15V10
|
|
This is a regulated 100V-240V AC input power supply. Output is 15V DC at up to 1.0A on a 2.1mm center positive plug. This power supply is included with some device kits (KT part numbers). It is capable of running multiple devices as long as the combined current draw is less than 1.0A. Power is transmitted to additional devices through the data cables.
RoHS Status:
Compliant
|
0.16 kg
|
2-5 Days |
$18.00
|
|
|
PS15V12U
|
|
This is a regulated 100-240V AC input power supply with 15V DC, 1.2A output on a 2.1 mm center positive power plug. Adapters are included for use in most countries: Type A (American/Japanese 2 pin), Type C (Europlug), Type G (British), Type I (Australian/Chinese). A single supply can run several devices. Power is transmitted to additional devices through the data cables.
RoHS Status:
Compliant
|
0.23 kg
|
2-5 Days |
$46.00
|
|
|
PS15V33
|
|
This is a regulated 100 - 240V AC input power supply with 15V DC, 3.3A output on a 2.1 mm (center positive) power plug. A single supply can run several devices. Power is transmitted to additional devices through the data cables.
RoHS Status:
Compliant
|
0.42 kg
|
2-5 Days |
$59.00
|
|
|
SUB-PS15V0410
|
|
Power Supply Substitution (subtract one PS15V04, add one PS15V10) Add this part number to your order if you are ordering a kit (KT-xxxx part number) that includes the PS15V04 power supply (400mA output) and you would like to substitute a PS15V10 power supply (1A output). Typically you would do this only if you want to run multiple devices from the same power supply.
RoHS Status:
Compliant
|
0.07 kg
|
2-5 Days |
$0.00
|
|
|
SUB-PS15V0412U
|
|
Power Supply Substitution (subtract one PS15V04, add one PS15V12U) Add this part number to your order if you are ordering a kit (KT-xxxx part number) that includes the PS15V04 power supply and you would like to substitute a PS15V12U power supply which has plug adapters for international use.
RoHS Status:
Compliant
|
0.15 kg
|
2-5 Days |
$0.00
|
|
|
SUB-PS15V1012U
|
|
Power Supply Substitution (subtract one PS15V10, add one PS15V12U) Add this part number to your order if you are ordering a kit (KT-xxxx part number) that includes the PS15V10 power supply and you would like to substitute a PS15V12U power supply which has plug adapters for international use.
RoHS Status:
Compliant
|
0.08 kg
|
2-5 Days |
$0.00
|
|
|
T-DC06
|
|
Data cable, 6ft, for use with all T-Series products - This is a standard 6 pin mini-din male to female PS/2 extension cable to go to the computer or between devices in the daisy chain.
RoHS Status:
Compliant version available
|
0.08 kg
|
2-5 Days |
$10.00
|
|
|
T-DC15
|
|
Data cable, 15ft, for use with all T-Series products - This is a standard 6 pin mini-din male to female PS/2 extension cable to go to the computer or between devices in the daisy chain.
RoHS Status:
Compliant version available
|
0.13 kg
|
2-5 Days |
$18.00
|
|
|
T-DC25
|
|
Data cable, 25ft, for use with all T-Series products - This is a standard 6 pin mini-din male to female PS/2 extension cable to go to the computer or between devices in the daisy chain.
RoHS Status:
Compliant version available
|
0.21 kg
|
2-5 Days |
$23.00
|
|
|
SUB-T-DC15
|
|
Data Cable Substitution (subtract one T-DC06, add one T-DC15)
Add this part number to your order if you are ordering a kit (KT-xxxx part number) and would like to substitute a T-DC15 data cable for the T-DC06 data cable that comes standard with the kit.
RoHS Status:
Compliant version available
|
0.05 kg
|
2-5 Days |
$8.00
|
|
|
SUB-T-DC25
|
|
Data Cable Substitution (subtract one T-DC06, add one T-DC25)
Add this part number to your order if you are ordering a kit (KT-xxxx part number) and would like to substitute a T-DC25 data cable for the T-DC06 data cable that comes standard with the kit.
RoHS Status:
Compliant version available
|
0.13 kg
|
2-5 Days |
$13.00
|
|
|
T-MDFDSF9
|
|
Serial adapter - This adapter is needed to connect T-Series devices to a standard 9 pin D-sub male RS-232 serial port. Only one is needed per computer.
RoHS Status:
Compliant version available
|
0.04 kg
|
2-5 Days |
$12.00
|
|
|
T-MDFDSF9-V
|
|
Serial adapter with power input - This adapter can be used to replace the T-MDFDSF9 for connecting T-Series devices to your serial port. The only difference is the addition of a power connector. Connecting the power supply to the adapter rather than the device reduces cable clutter and is useful for vacuum applications where fewer cable connections to the device are desired.
RoHS Status:
Compliant version available
|
0.04 kg
|
2-5 Days |
$23.00
|
|
|
T-USB
|
|
USB to serial converter - This converts a USB port into an RS 232 serial port. Our products are controlled through your computer's serial port. If you have no available serial ports, use this converter to create one from a free USB port.
RoHS Status:
Pending
|
0.17 kg
|
2-5 Days |
$41.00
|
|